Pramet/Dormer ISSN11 High Feed Mills

Started by neurosis, March 16, 2022, 07:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages1

neurosis

March 16, 2022, 07:08 AM
Anyone tried these things?  We're going to be running some tests in titanium.

These have a variable pitch which I've never tried in a high feed mill. 
"I didn't know they gave out rings at the Holocaust"

gcode

#1
March 16, 2022, 09:54 AM
got a link???

neurosis

#2
March 16, 2022, 10:58 AM
Sure.

Here is the HFM that we're testing

https://shop.dormerpramet.com/us/en_US/p/7800657
"I didn't know they gave out rings at the Holocaust"

TSmcam

#3
March 16, 2022, 02:38 PM
I've never used one of those, but we use a lot of Dormer/Pramet drills and endmills. We get pretty good performance out of them.
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

gcode

#4
March 16, 2022, 03:45 PM
The web page says its good for plunge milling and progressive plunge milling
I have no idea what progressive plunge milling is

beej

#5
March 18, 2022, 09:02 AM Last Edit: March 18, 2022, 09:06 AM by beej Reason: wrong info
Quote from: gcode on March 16, 2022, 03:45 PMThe web page says its good for plunge milling and progressive plunge milling
I have no idea what progressive plunge milling is
that must be plunge milling in succession, I'm guessing.
to vice, innocence must always seem only a superior kind of chicanery.~Ouida

Jeff

#6
March 22, 2022, 04:24 AM
Quote from: gcode on March 16, 2022, 03:45 PMI have no idea what progressive plunge milling is

that's when you plunge mill while wearing a man bun, drinking your starbucks latte and calling people racist.
Go Up Pages1