Rob my store bitch

Started by gcode, August 06, 2022, 08:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gcode

https://twitter.com/MrAndyNgo/status/1555610270256562176?s=20&t=-TIBA5YJWqDQrqfKu6GEaA

Sadly, I suspect the store clerk is in more trouble than the punk trying to rob him
turn your sound on

neurosis

Here is another feel good story from a local Shell station not far from where I live.

Police: gas station clerk shoots, kills alleged armed robber in Auburn


https://www.kiro7.com/news/local/police-investigating-shooting-auburn-gas-station/LZE3SVKAHBDITCHDPS2SWFQ3BU/
I'll go back to being a conservative, when conservatives go back to being conservative.

gcode

This one was about 15 miles from my house

He shot my arm off

gcode

In the Vegas stabbing, the robber was 17 tears old
The store clerk was using a 3" pocket knife
He stabbed robber 7 times and stopped when the robber quit fighting.
He drug the robber into the middle of the store, called 911 and rendered first aid
The robber is in the hospital.
I suspect we'll hear from the DA tomorrow.


Like Like x 1 View List

CNCAppsJames

Quote from: gcode on August 06, 2022, 08:21 AMhttps://twitter.com/MrAndyNgo/status/1555610270256562176?s=20&t=-TIBA5YJWqDQrqfKu6GEaA

Sadly, I suspect the store clerk is in more trouble than the punk trying to rob him
turn your sound on
He's only in trouble if the state gets involved. The county is good to go with good shoots like this.

The piece of shit getaway driver needs a citation for parking in the Handicapped Parking. That'll be $350+ penalty assessments. :rofl:
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

CNCAppsJames

Quote from: gcode on August 07, 2022, 09:02 AMIn the Vegas stabbing, the robber was 17 tears old
The store clerk was using a 3" pocket knife
He stabbed robber 7 times and stopped when the robber quit fighting.
He drug the robber into the middle of the store, called 911 and rendered first aid
The robber is in the hospital.
I suspect we'll hear from the DA tomorrow.
That'll be one to watch. Stabbing is an intimate process.
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

Jeff

Quote from: gcode on August 07, 2022, 09:02 AMIn the Vegas stabbing, the robber was 17 tears old
The store clerk was using a 3" pocket knife
He stabbed robber 7 times and stopped when the robber quit fighting.
He drug the robber into the middle of the store, called 911 and rendered first aid
The robber is in the hospital.
I suspect we'll hear from the DA tomorrow.




I like the part where he's calling 911 and the turd lying on the floor says "Don't let me die,it wasn't my idea" and the guy says "shutup".
Funny Funny x 1 View List

gcode

I've been following this
The turd didn't die and the DA has not charged the store clerk yet
You'll be amazed to know all three of the turds had long arrest records
despite their young age. I read that they all were wearing ankle monitors
but have not been able to verify that

CNCAppsJames

Quote from: gcode on August 19, 2022, 05:45 AMI've been following this
The turd didn't die and the DA has not charged the store clerk yet
You'll be amazed to know all three of the turds had long arrest records
despite their young age. I read that they all were wearing ankle monitors
but have not been able to verify that

Would not be shocked one bit if it were true.

How many people than do bad stuff are "known to Law Enforcement"? Like almost all. Right? It's definitely not like yesterday the guy was in church, reading and studying the Word of God then woke up today and said, "You know what, I'ma go rob some shit today with my homeys."
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

Incogneeto

Quote from: CNCAppsJames on August 19, 2022, 12:36 PMand said, "You know what, I'ma go rob some shit today with my homeys."

Bwahahaaaa "homeys"

Funny Funny x 3 View List

gcode

I think all three of these turds were gringos
and...
they need to find a new line of work

They really suck at robbing stores :no:
Like Like x 1 View List

gcode

#11
Quote from: Newbeeeeâ„¢ on August 20, 2022, 02:25 AMOoohhhh that did look a little excessive!
A couple in each leg would have made him collapse on the floor like a ton of shit?
I read that he'd died?

The store clerk was using a 3" pocket knife
If you watch carefully, the robber continued to fight until he took one in the neck or shoulder.
The robber quit fighting at that point and the clerk stopped stabbing.
Then he called 911 and rendered first aid
In Kailiforniastan or New York the clerk would already be doing life.
In Vegas the DA is still "investigating"
I think they'll let things cool down then drop the matter.
Vegas/ Nevada is run by corrupt labor unions, but they've still got a little common sense left where
law and order are concerned
Like Like x 1 View List

CNCAppsJames

Quote from: gcode on August 20, 2022, 06:51 AMThe store clerk was using a 3" pocket knife
If you watch carefully, the robber continued to fight until he took one in the neck or shoulder.
The robber quit fighting at that point and the clerk stopped stabbing.
Then he called 911 and rendered first aid
In Kailiforniastan or New York the clerk would already be doing life.
THe fucked up thing about Kommieforniastan and presumably New York is the county DA's (except for the shit show known as Los Angeles County) in most places would be good to go with self defense and no charges filed. BUt the AG for this shit hole 100% would go after him because Bonta is a leftist turd bucket.
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM