Fusion 360

Incogneeto · March 29, 2023, 10:28 AM

HELLO!!!!!!

Has anyone tried saving a file and Posting it here??

from Fusion360.....PNG , JPG or TIFF??

If so??

What magic did you use?

TIA

Incogneeto · March 29, 2023, 10:41 AM

Quote from: neurosis on March 20, 2023, 02:26 PMI mean, that was the perfect layup.

Sooo was your Mom.

neurosis · March 29, 2023, 10:55 AM

Quote from: Incogneeto on March 29, 2023, 10:41 AMSooo was your Mom.

My mom is about 80 years old. If she's still laying it up at that age I'm not mad. I'm impressed.

Incogneeto · March 29, 2023, 11:04 AM

Quote from: neurosis on March 29, 2023, 10:55 AMMy mom is about 80 years old. If she's still laying it up at that age I'm not mad. I'm impressed.

Experience is always a factor. LOL!!!

CNCAppsJames · March 29, 2023, 09:58 PM

Quote from: Newbeeee™ on March 22, 2023, 12:42 AMSo are the 5ax paths Delcam's originals ...?

Nope, ModuleWorks.

CNCAppsJames · March 30, 2023, 06:20 AM

MW gives SW Developers all the tools they need. How they Dev guys implement the various tools is up to them. The other factor, I believe AD is trying to keep the paths as easy as possible to use meaning there's a chance the controls needed to solve this problem lie under the hood instead of out in the open. Not a slight on AD at all. A lot of people knock Fusion360, but it's legitimate software and if they ever make it ITAR compliant, the standalone CAD/CAM world will have a new serious competitor to contend with. One that is a full blown assembly modeler with kinematicsnand the works.

TylerBeer · March 31, 2023, 02:09 PM

Quote from: Newbeeee™ on March 30, 2023, 12:19 AMOhhhh....THAT surprises me!
Back in the "DUCT" days of Delcam, the 5ax paths were noted as word leading.
And they (Delcam) had a lot of SW engineers working on it before AD bought it.

Delcam were their own paths - yes?
So have they (AD) dumped them for MW because of ongoing new features and support - as they sacked all the SW engineers so cannot further develop "old Delcam", so have gone a new (MW) way?

Yeah that's a significant bummer - I was hoping somehow those Delcam paths would make their way out into the Mastercam world - although maybe this is a chance to grab those engineers... I had the chance to do some robot programming with Delcam and at the risk of sounding like he-who-should-not-be-named the graphical 5ax editing was really nice to use.

CNCAppsJames · March 31, 2023, 08:37 PM

I think PowerMill's blade stuff is easier and more intuitive that MW's... if Sandvik has the chance to snatch those developers up... they ought to.