CAMplete Truepath for Mastercam 2025 Now Available

[CNCAppsJames]

Good Morning folks,

The CAMplete TruePath PlugIn for Mastercam 2025 is now available. I should have a new Post, Operations, Default Operations, Machine Definition and Control Definition ready in the next day or two.

I'll post links here.

[CNCAppsJames]

Mastercam to CAMplete Plug In
Mastercam 2025 to CAMplete TruePath Plug-In Link

Shared Mastercam 2025 Data link below
Shared Mastercam 2025 Folder

If you have an existing Mastercam 2025 Installation, extract to C:\Users\Public\Public Documents\

Here's the contents.
You cannot view this attachment.


If you extract it to C:\Users\Public\Public Documents\Shared Mastercam 2025\ then the result will look like C:\Users\Public\Public Documents\Shared Mastercam 2025\Shared Mastercam 2025\

...and that's not gonna work...

Anyway, if you've got any questions, you know how to find me. Hope This Helps.

P.S. If you are hoping that you can use this to post out G-Code to run on a machine, you can't. Well, I shouldn't say that, but the post itself is only the MPGen5X post with ZERO code output edits to it. The post is only there to contain the text for the "stuff". Canned Cycle Titles, Canned Text Titles, stuff like that. You need CAMplete TruePath to get what you want/need out of it.