Tariff purchases?

Started by neurosis, February 20, 2025, 04:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mowens

Quote from: Smit on February 22, 2025, 01:25 PMHappily it's easy to avoid getting into a talk about politics. Here or elsewhere.

Just ignore it and nobody will bother you. :shrug:


That would mean disconnecting from the forum. People I've talked with for over 20 years. But people change. Maybe that road has come to an end.
Like Like x 1 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

Incogneeto

#76
Quote from: mowens on February 22, 2025, 03:09 PMThat would mean disconnecting from the forum. People I've talked with for over 20 years. But people change. Maybe that road has come to an end.

I would miss you. :(

I hope that is Not your choice. :)

I would miss you.

If you need just take a break.

You saved my ass.

I Know it was you that offered help in my Dark time.

I will never forget that.
Like Like x 3 View List

neurosis

Quote from: mowens on February 22, 2025, 03:09 PMThat would mean disconnecting from the forum. People I've talked with for over 20 years. But people change. Maybe that road has come to an end.

We've lost quite a few people over the last few years. It's weird that they were willing to tolerate the political back and forth on the other forum but here, it's become less tolerable?
I'll go back to being a conservative, when conservatives go back to being conservative.

CNCAppsJames

Quote from: neurosis on February 22, 2025, 03:21 PMWe've lost quite a few people over the last few years. It's weird that they were willing to tolerate the political back and forth on the other forum but here, it's become less tolerable?
People used to have thicker skin and most would debate. 

Now they just 🤪 you and don't offer any contrary solutions. It's the way of the left. 

They've run out of ideas and have nothing left but ridicule, scorn and pejoratives.

:coffee: 
Crazy Crazy x 1 View List
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

Incogneeto

I'm going to say one more thing mike and you can tell me to shut the Fuck up .

You are carrying a big load.

Take a Break.!!

3 days !! 5 days !!

Get out!!

Beach!! Mountains!!

Just you.


neurosis

Quote from: CNCAppsJames on February 22, 2025, 03:28 PMPeople used to have thicker skin and most would debate.

Now they just 🤪 you and don't offer any contrary solutions. It's the way of the left.

They've run out of ideas and have nothing left but ridicule, scorn and pejoratives.

:coffee:

Oh geez. It's all the same people having all the same arguments. 

I do know this. If everyone decides to bag out it will become a lot cheaper for me. :D
Funny Funny x 1 View List
I'll go back to being a conservative, when conservatives go back to being conservative.

Incogneeto

Quote from: neurosis on February 22, 2025, 03:32 PMOh geez. It's all the same people having all the same arguments. 

I do know this. If everyone decides to bag out it will become a lot cheaper for me. :D

It's not a Bag out.

It's a reach out.

Listen. :wub:

neurosis

Quote from: Incogneeto on February 22, 2025, 03:42 PMIt's not a Bag out.

It's a reach out.

Listen. :wub:

What does that mean exactly?  Don't annoy us because we're the majority?

I'd rather just let the forum die.

There is nothing in this for me.
I'll go back to being a conservative, when conservatives go back to being conservative.

Del.

Quote from: Incogneeto on February 22, 2025, 03:17 PMI would miss you. :(

I hope that is Not your choice. :)

I would miss you.

If you need just take a break.

You saved my ass.

I Know it was you that offered help in my Dark time.

I will never forget that.

Mikes a good guy.
Like Like x 2 View List

Leehound

Quote from: neurosis on February 22, 2025, 03:21 PMWe've lost quite a few people over the last few years. It's weird that they were willing to tolerate the political back and forth on the other forum but here, it's become less tolerable?
I remember when we used to talk about our hobbies. Photography, 3D Printing etc. Those days are gone. It's sad.
Like Like x 1 View List

neurosis

#85
Quote from: Leehound on February 22, 2025, 04:00 PMI remember when we used to talk about our hobbies. Photography, 3D Printing etc. Those days are gone. It's sad.

That's more a reflection of the people who post here?

I can flip the switch and shut it off tomorrow if that's what we want.

This isn't a big thing for me.. If it's negatively affecting everyone's lives, lets end it?
I'll go back to being a conservative, when conservatives go back to being conservative.

Del.

Quote from: Leehound on February 22, 2025, 04:00 PMI remember when we used to talk about our hobbies. Photography, 3D Printing etc. Those days are gone. It's sad.

I think it's alright to have a thread or 2 but not 9 out of every ten about politics.
Like Like x 2 View List

CNCAppsJames

#87
Quote from: neurosis on February 22, 2025, 04:05 PMThat's more a reflection of the people who post here?

I can flip the switch and shut it off tomorrow if that's what we want.

This isn't a big thing for me.. If it's negatively affecting everyone's lives, lets end it?
I think it's less a reflection of the "people" and more of a reflection of how polarized and disconnected society has generally become.

The original mission of eMC (which pretty much brought us all here together) was a great mission. CAD/CAM users helping other CAD/CAM users. It morphed. The leadership group refused to heed several key warnings that things were going to become a problem. And what happened happened.

Then this place was born out of a desire to remain connected to some that had moved on for one reason or another.

I left eMC for years because the leadership group was trash. They penalized or punished productive members and let the dead weight do whatever they wanted. I only went back at the request of my boss. It's a medium many of our customers prefer rather than phone, e-mail or other traditional support methods. I have customers that only use IG for support. It's hard but I make it work as best I can.

I left eMC. If people want me gone from here, I'm fine with it. You can put it up to a vote. It would not hurt my feelings in the least if I got the boot.
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

neurosis

#88
Quote from: CNCAppsJames on February 22, 2025, 10:33 PMI left eMC. If people want me gone from here, I'm fine with it. You can put it up to a vote. It would not hurt my feelings in the least if I got the boot.

I don't want to see anyone leave and that really isn't the point I'm trying to make.

It seems as though the larger crowd can literally say what ever the fuck they want to and they get a free pass, but then if someone gives an opinion the the majority doesn't like, then the forum has become too intolerable to deal with anymore.

I'm open to every opinion, even opinions that I think might be a little crazy. I don't think that you should have to censor what you say at all, but I also don't want to have to censor myself because my opinion is unpopular here. While I'd rather see people be respectful to each other and not resort to name calling over a silly disagreement, I wouldn't expect anyone to sit there and tolerate it.
Like Like x 1 View List
I'll go back to being a conservative, when conservatives go back to being conservative.