The TopSolid Thread -

Started by neurosis, April 22, 2021, 04:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages 1 2 3

neurosis

#30
May 12, 2021, 08:26 AM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Newbeeee™ post_id=10962 time=1620832489 user_id=157I remember you being very vocal at the time on eWC...  :lol:
You'll be pleased to hear that 2020 optirough still over engages in corners at the start of roughing a billet (from the outside)...


 :thumbup:

Yea. I wasn't very happy.  If I remember right, our local ex-pro baseball player Bob Wolcott wasn't very happy about the situation and was fairly vocal about it too.  

Fast forward to 2021 and it's kinda like volumill who?

TSmcam

#31
May 12, 2021, 04:58 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: neurosis post_id=10949 time=1620822509 user_id=49You'll have to let me know what you think of it.  

There were some things that I noticed in earlier versions (boost milling) that I didn't care for.


What things bugged you about it?
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

neurosis

#32
May 12, 2021, 05:09 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: TSmcam post_id=11001 time=1620863919 user_id=91What things bugged you about it?


I didn't use it myself.

I saw video's of the tool path.  Some of it looked pretty inefficient.  It doesn't work exactly like dynamic milling from what I saw, It looks more like varimill.  The webinar they just had made it look like some of that got sorted out.  

I should ask them for a demo license and give it a test run.
Go Up Pages 1 2 3