The TopSolid Thread -

Started by neurosis, April 22, 2021, 04:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages 1 2 3

neurosis

#30
May 12, 2021, 08:26 AM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Newbeeee™ post_id=10962 time=1620832489 user_id=157I remember you being very vocal at the time on eWC...  :lol:
You'll be pleased to hear that 2020 optirough still over engages in corners at the start of roughing a billet (from the outside)...


 :thumbup:

Yea. I wasn't very happy.  If I remember right, our local ex-pro baseball player Bob Wolcott wasn't very happy about the situation and was fairly vocal about it too.  

Fast forward to 2021 and it's kinda like volumill who?
I'll go back to being a conservative, when conservatives go back to being conservative.

TSmcam

#31
May 12, 2021, 04:58 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: neurosis post_id=10949 time=1620822509 user_id=49You'll have to let me know what you think of it.  

There were some things that I noticed in earlier versions (boost milling) that I didn't care for.


What things bugged you about it?
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

neurosis

#32
May 12, 2021, 05:09 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: TSmcam post_id=11001 time=1620863919 user_id=91What things bugged you about it?


I didn't use it myself.

I saw video's of the tool path.  Some of it looked pretty inefficient.  It doesn't work exactly like dynamic milling from what I saw, It looks more like varimill.  The webinar they just had made it look like some of that got sorted out.  

I should ask them for a demo license and give it a test run.
I'll go back to being a conservative, when conservatives go back to being conservative.
Go Up Pages 1 2 3