Cimco Verify for Mastercam

Started by gcode, September 02, 2026, 09:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gcode

#30
I ended up buying the Verify version of Cimco Edit.
It's a really good product.

It's launch time, visual appearance and feature set are really good.
Save as STL is nearly instant and yields very good stl models.

Compare is excellent, far superior to Mastercan Verify Compare.
It also pulls up to 60% of my video card's GPU while running. (Nvidia Quadro RTX A4500)

On the negative side.

You can't load new operations into a session like you can in Mastercam Verify
and you can't bring in wireframe from Mastercam. I like that feature as it's useful for visual reference.

My 3D Connexion Space Pilot never works the first time you launch Cimco Verify, but if you close and relaunch
it works as it should.

I'm currently programming an Okuma 5X trunnion machine and a Cinci 5X gantry mill.
I haven't got the gcode backplot working properly yet, but that's a problem between the seat and key board. I will address it when I get my backlog beat into submission.

It's well worth the $1k they are charging for it.

Like Like x 3 View List

gcode

#31
Cimco Verify really impressed me this week

I'm doing a Ø40" impeller with .25R floor fillets.
The vanes are not tall and I'm finishing the floor fillets with a 1/2" ball endmill
One vane showed something odd on a floor fillet for 3/4"
It was near the lead in/out area and I was afraid there was a problem with that.
I didn't see anything in Backplot and Vericut didn't show anything.
To be honest, I haven't used Mastercam Verify once since I bought this package.

After digging  around a while I found the problem.
There was a defect in the solid model where the floor fillet meet the floor
That was causing the tool to rise and fall .003" in .75" of travel... and it showed
up in Cimco Verify.

These stock models are 50 to 75 meg and I was really impressed that this defect showed up.
The finished part was in spec, but it was an easy fix so I fixed it.

edit

another thing that impressed me.

The finished file is 140 operations, mostly Unified and  morph and swarf toolpaths.
Mastercam file size  = 125 MB
If I select all operations, launch Cimco Verify and hit fast forward it processes the whole
file in under a second!!!



Like Like x 1 View List