Mastercam You Tube videos

[gcode]

I liked this one

[Jeff]

So he used "Trim cuts shorter than",  does that mean that those cuts are eliminated from the toolpath?

[gcode]

So he used "Trim cuts shorter than",  does that mean that those cuts are eliminated from the toolpath?

Yes, it looks like the the partial cuts at the start and end of the toolpath were eliminated

[CADCAM3D5AXIS]

G That tool path looks like its going to get some use in a lot of intersections on surface/solid models that have curves and blends that give everyone a lot of trouble sometimes. I cant wait to apply it to the Tuff hard to get areas. And then we shall see how well it can contain or at least function in tight areas.
Cool Stuff
 

[Dylan Gondyke]

"Trim cuts shorter than" is one of those stealth things that I use all the time now to wipe out sliver cuts. Between this and the trim cut options possible in the Stock page, you can really clean up the motion on geometry with wandering edges and variable stock.

[gcode]

I love the Module Works toolpaths.
What you can do with them is limited only by your imagination.
My one big gripe is that you cannot filter them.
They are all point to point and frequently generate files too large for the machines here.
CNC has put out a whole series on videos on the new Unified toolpath
It's well worth your time to watch them