Dynamic Roughing Improvements?

Started by Matthew Hajicek, July 25, 2022, 03:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages1

Matthew Hajicek

July 25, 2022, 03:49 PM
Does current Mastercam do this?


Like Like x 1 View List

mwearne

#1
July 25, 2022, 09:29 PM
Very interesting option to have inside a toolpath like that. Here's a comparison using images from the video and a few quick toolpaths in Mastercam.
Like Like x 2 View List

Matthew Hajicek

#2
July 25, 2022, 11:03 PM
Quote from: mwearne on July 25, 2022, 09:29 PMVery interesting option to have inside a toolpath like that. Here's a comparison using images from the video and a few quick toolpaths in Mastercam.


Nice!

Who wants to try the same thing in Top Solid?
Like Like x 1 View List

neurosis

#3
July 26, 2022, 04:52 AM
Quote from: Matthew Hajicek on July 25, 2022, 11:03 PMWho wants to try the same thing in Top Solid?

I would if I had their boost milling module. :(
I'll go back to being a conservative, when conservatives go back to being conservative.

gcode

#4
July 26, 2022, 06:00 AM
Quote from: mwearne on July 25, 2022, 09:29 PMVery interesting option to have inside a toolpath like that. Here's a comparison using images from the video and a few quick toolpaths in Mastercam.


What are the cycle times for these examples??
Go Up Pages1