This weeks "hottest CAM software "

[riverhunter]

Behold........

Titan

[JParis]

More like "The Deal of Month"

Whoever gives him the best deal is who gets pushed next month...

Farcical at this point

[Newbeeee™]

By now though, honestly, who is it looking bad for?
"The Fool", who is hawking product door to product door, to be paid the most $$$$.
Or "The Fool", who is paying him....

[JParis]

By now though, honestly, who is it looking bad for?
"The Fool", who is hawking product door to product door, to be paid the most $$$$.
Or "The Fool", who is paying him....

The Fool who keeps propping him up like he's anything but a bought PR guy...

Barnum would be proud

[Brian]

Us TS users are still waiting for our turn in the barrel with this guy! You never know-truth is stranger than fiction as they say.

I think this is what's known as "serial monogamy." You can have as many partners as you want, but just one at a time-no double dipping.

Mon Dieu!

[TSmcam]

Us TS users are still waiting for our turn in the barrel with this guy! You never know-truth is stranger than fiction as they say.

I think this is what's known as "serial monogamy." You can have as many partners as you want, but just one at a time-no double dipping.

Mon Dieu!

I'd rather he stay away from TS. "PDM in 5 minutes"... pls no

[Brian]

I'd rather he stay away from TS. "PDM in 5 minutes"... pls no

Maybe he could start shilling for TS by convincing his meathead followers that PDM stands for "Pretty Damn Macho", and conveniently sidestep any mention that TopSolid is a (gasp!) French company!

If he's really doing his homework he'll already know to NEVER use the words "unified", "hybrid", or "seamless" either....or he'll turn into a pumpkin!

[CNCAppsJames]

...
If he's really doing his homework he'll already know to NEVER use the words "unified", "hybrid", or "seamless" either....or he'll turn into a pumpkin!

Oh... you're for sure gonna burn for that.  

[YoDoug]

"Full graphical toolpath editing" was when CAM software peaked!

[CNCAppsJames]

BITD when the men were men and the boys at least knew that .187 and .1875 were different.

[Brian]

"Full graphical toolpath editing" was when CAM software peaked!

Shoot-I forgot that one!

[Jeff]

"Full graphical toolpath editing" was when CAM software peaked!

Like this thread? One person's comments are no longer on there. I guess that happens when the banhammer hits ya lol.

https://practicalmachinist.com/forum/threads/graphical-editing-of-toolpaths.136484

[MIL-TFP-41]

I thought in order to have a proper CAD/CAM system you had to have both full graphical toolpath editing and HOOPS.

[CNCAppsJames]

I thought in order to have a proper CAD/CAM system you had to have both full graphical toolpath editing and HOOPS.

Yes, yes, YES! HOOPS FTMFW!

[CNCAppsJames]

Like this thread? One person's comments are no longer on there. I guess that happens when the banhammer hits ya lol.

https://practicalmachinist.com/forum/threads/graphical-editing-of-toolpaths.136484

Post #7 by D Rey I KNOW hit a sore spot... the only and last to the best of my knowledge file he whom shall not be named sent out was so bad I thought a literal 6 year old did it. The infamous "mask on arc problem". He had different sized arcs ... .187 and .1875 and he was pissed because window selection wasn't grabbing one or the other.  

No shit Sherlock, they aren't the same and entries arguing they were.

Comedy GOLD!