Where's The Duct Tape??

Started by Incogneeto, January 07, 2024, 08:49 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


Incogneeto

Everyone is trying to blame Spirit .

But that's like Blaming Spirit for all those Fuselages that were laying in The river.

Kinda like Machining.

"Who Pushed the Button" :o

mowens

Spirit made the part. It's a filler for an optional exit door that most customers don't use. A plug, if you will. However, Boeing removes that plug to load interiors and then reinstalls it. Kind of a toss up right now, as far as blame. Of course, I know who I blame.  :)
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

Here's Johnny!

Quote from: Newbeeee™ on January 08, 2024, 12:47 AMHave I ever said I hate flying?

It is the hard sudden landing impact that is dangerous...flying is the easy part!!! ;D
Funny Funny x 1 Thank  You Thank You x 1 View List

mowens

My boss just got called into a meeting for all managers under the vice president of engineering and research and development (over a hundred).
Shock Shock x 2 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

mowens

Not yet. We'll see when the meeting is over.
Like Like x 1 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

Del.

Lucky multiple people weren't sucked out of plane.
Like Like x 1 View List

RobertELee

Quote from: Del. on January 08, 2024, 06:19 PMLucky multiple people weren't sucked out of plane.

I heard a kid had his shirt sucked off and a few people lost their phones. Had it been a higher altitude this could have been much worse.

Watching Blancolirio's take on it, it's a mighty fancy system for a plug, but I'm guessing the bolts were never reinstalled.


mowens

The row where the plug blew out was empty by some miracle.
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

kccadcam

Shock Shock x 2 View List
KC

A Million seconds is 12 Days
A Billion seconds is 31 Years
A Trillion seconds is 31,688 Years

YoDoug

QuoteWhere's The Duct Tape??

Duh, it's in the trunk with the zip ties and chloroform. Where else would you keep it.  ;)
Like Like x 2 Funny Funny x 3 View List
"In all my years here and on the old forum I have heard, and likely said, some pretty unhinged stuff. But congrats, you're the new leader in clubhouse."  - ghuns, 6/06/2025

mowens

Quote from: YoDoug on January 09, 2024, 09:30 AMDuh, it's in the trunk with the zip ties and chloroform. Where else would you keep it.  ;)

Otherwise known as "date night" in YoDoug's younger days.   ;D
Funny Funny x 4 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

mowens

Uh oh


"Also on Monday, United Airlines – which has more Max 9s than any other US carrier – said it found loose door plug bolts on an undisclosed number of its Boeing 737 Max 9 aircraft as it was performing the FAA-mandated inspections of the jets. Alaska Airlines also said Monday it found loose hardware on some of its 737 Max 9 planes during inspections."
Shock Shock x 2 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

YoDoug

Quote from: mowens on January 09, 2024, 10:12 AMOtherwise known as "date night" in YoDoug's younger days.   ;D

Not everyone can just easily invite aspiring young ladies over for some Jello pudding cups, some guys gotta put in work.
Funny Funny x 1 View List
"In all my years here and on the old forum I have heard, and likely said, some pretty unhinged stuff. But congrats, you're the new leader in clubhouse."  - ghuns, 6/06/2025

CNCAppsJames

Quote from: YoDoug on January 09, 2024, 11:33 AMNot everyone can just easily invite aspiring young ladies over for some Jello pudding cups, some guys gotta put in work.
I see what you did right there...

:rofl:
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM