The Assimilation Continues

[jstell]

there's stuff that was posed early on that is stil relevant. 

There's a couple threads this week revived from 2013 and 2021, still relevant.

[neurosis]

I'd like to get back on the beta team just to play with everpath.   

[CNCAppsJames]

There's a couple threads this week revived from 2013 and 2021, still relevant.

The "Poor Man's Dataserver" topic... I'm pretty sure I posted that topic ~2004 and it gets revived at least every couple of years or so. Last time I recall seeing it... it was around 8 pages. Some really good questions and parameter info in there. 

[Zoffen]

Don't worry guys. I'm sure the Mastercam AI will be able to answer any and all questions about the software....

[Here's Johnny!]

Don't worry guys. I'm sure the Mastercam AI will be able to answer any and all questions about the software....

User asks co-pilot why is Mastercam doing this....co-pilot responds "contact CNC software for clarification"...

[neurosis]

Hey @Dylan Gondyke. How hard is it to get back on the beta team? 

It say's that I'm still on it.  Get emails etc.  You explained that some time back.

[Dylan Gondyke]

The Technical Preview period (~October thru February) has wrapped for 2027 and the public Beta period will be starting up this month, so nothing special to do if you're a regular user at this point except download the Beta when it goes up. For signing up for the technical preview period this fall, we'll open up a simpler process later this year.

[G-Jorg]

Yeah, Patrick and Greg(?) are sitting next to me... Ivory Tower employees.

You mean Patrick and Scott, yes I was sitting next to you at some point. I am by no means employed by the Ivory Tower.

[SuperHoneyBadger]

The "Poor Man's Dataserver" topic... I'm pretty sure I posted that topic ~2004 and it gets revived at least every couple of years or so. Last time I recall seeing it... it was around 8 pages. Some really good questions and parameter info in there.

I have the meat and potatoes of that thread printed out and shelved in my important Macro/Params folder. Thanks again. That, and your explanations of how to use G130/G131 properly, which I have used a few times now to explain how it works

[JakeL]

your explanations of how to use G130/G131 properly

G130/G131 on the OSP control? We recently had an issue with that. It wasn't my problem to solve so not sure where they ended up. But since I'm here, if you have links or documents, any chance you could send them my way?

[CNCAppsJames]

G130/G131 on the OSP control? We recently had an issue with that. It wasn't my problem to solve so not sure where they ended up. But since I'm here, if you have links or documents, any chance you could send them my way?

O
K
Until
Matsuura
Arrives

Matsuura has been using G131/G130 for it's high speed modes for decades. Not sure about Okuma. Not my monkeys, not my circus. 
 
 

[SuperHoneyBadger]

G130/G131 on the OSP control?

Fanuc hi-speed:

https://www.emastercam.com/forums/topic/103674-matsuura-mx520/?do=findComment&comment=1327044

This is the post I was speaking about. Not sure if it will help on the Okuma

[JakeL]

O
K
Until
Matsuura
Arrives

Matsuura has been using G131/G130 for it's high speed modes for decades. Not sure about Okuma. Not my monkeys, not my circus.

Holy smokes talk about a brain fart. We literally use G131 in some of our Fanucs. My mistake.

I was confused cause I didn't think James did anything with Okuma. He answered that misunderstanding loud and clear

[CNCAppsJames]

Fanuc Matsuura hi-speed:

https://www.emastercam.com/forums/topic/103674-matsuura-mx520/?do=findComment&comment=1327044

This is the post I was speaking about. Not sure if it will help on the Okuma

Free Fiss aaaaannnnnnd....

FANUC HIgh Speed is;
G05 P10000
G05.1Q1
G05.1Q1Rn (R0-R10)
G05.1Q3 (technically NANO Smoothing)
G08P1