People leaving this forum?

Started by Here's Johnny!, May 04, 2026, 08:02 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

CNCAppsJames

"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

TSmcam

Quote from: CNCAppsJames on May 10, 2026, 10:57 AM@Brian the technical content is here;
https://mastercamforums.com/forum/index.php/board,6.0.html

It's not as rich/deep in content as say eMastercam, Practical Machinist, etc... then again Rome wasn't built in a day. :coffee:

When I go onto this site, the Industrial Forum is where I go first, and I go fairly often. I'll go to the Off Topic if I feel like it. I feel less and less inclined as the shitbirds are circling and like to crap all over the place.

:coffee:

I work the same method. I go to the Industrial Forum first, to see if there is anything of interest. Sometime, I take a look at Off Topic, do a bit of a browse if I feel like it. But rarely do I comment in there. Politics gets bit boring after a while.

To be honest, from a technical perspective, between this site and the E, combined they are a shadow of what used to be. It is kind of shame.
Like Like x 2 View List
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

Incogneeto

#272
Quote from: CNCAppsJames on May 10, 2026, 12:28 PMMicrobucks ARE a thing.

:coffee:

micro and Bucky have a lot in common.

" Intro to journo" = "read a book"

Lack of factual information.

Thought Smit was his friend too.

Doesn't back up his bets.

I remember when Trump Won and HilLiary lost. Smit disappeared for months. HilLiarry couldn't even Concede. Went to the woods.

Poor Fish was standing by the mailbox waitin on that check.

Bucky was just a stain on the stall wall back then. ;)

Passive/aggressive    = Narcissistic.

Funny Funny x 1 View List

Incogneeto

Quote from: TSmcam on May 10, 2026, 12:30 PMI work the same method. I go to the Industrial Forum first, to see if there is anything of interest. Sometime, I take a look at Off Topic, do a bit of a browse if I feel like it. But rarely do I comment in there. Politics gets bit boring after a while.

To be honest, from a technical perspective, between this site and the E, combined they are a shadow of what used to be. It is kind of shame.

Hi NZ !!! How's Christchurch?? :D
Like Like x 1 View List

CNCAppsJames

@TSmcam I found out last month I have two friends in Christchurch... teh wife and I are definitely going to have to get out there. 😁
Like Like x 1 View List
"That bill for your 80's experience...yeah, it's coming due. Soon." Author Unknown

Inventor Pro 2026 - CAD
CAMplete TruePath 2026 - CAV and Post Processing
Fusion360 and Mastercam 2026 - CAM

TSmcam

Quote from: Incogneeto on May 10, 2026, 12:45 PMHi NZ !!! How's Christchurch?? :D

Hi USA! Hows, er... wherever you are?

Christchurch is all good. The days are cooling day, and the daylight is shorter. But everything is good. Work is busy, which makes life interesting :)

Hows life up therE?
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

TSmcam

Quote from: CNCAppsJames on May 10, 2026, 05:55 PM@TSmcam I found out last month I have two friends in Christchurch... teh wife and I are definitely going to have to get out there. 😁

Yeah? Seriously? Do you know what part of Christchurch they are in, and what they do here?

You'll definitely have to make it down here. Christchurch is a nice place, and you're close to a lot of really nice places like Tekapo, Queenstown and Wanaka. We brew good beer down here too :)
Like Like x 2 View List
CNC Softwares own 'lil piece of Poison Ivy.
TopSolid for the Win :)

Smit

I'd forgotten there was an industrial forum here! There were a lot more posts than I was expecting too.
Funny Funny x 2 View List

Bucky Cornstarch

Quote from: Incogneeto on May 10, 2026, 12:40 PMmicro and Bucky have a lot in common.

" Intro to journo" = "read a book"

Lack of factual information.

Thought Smit was his friend too.

Doesn't back up his bets.

I remember when Trump Won and HilLiary lost. Smit disappeared for months. HilLiarry couldn't even Concede. Went to the woods.

Poor Fish was standing by the mailbox waitin on that check.

Bucky was just a stain on the stall wall back then. ;)

Passive/aggressive    = Narcissistic.



JFC incog, I thought you understood that there's no prize for posting the most stupid shit, yet you persist.

Let's go:

1: Yes, read a fucking book. He was right. If you did that, perhaps you wouldn't need to take an intro to journalism class.

And give me a fucking break on factual information. You nutters wouldn't know a fact if it was stamped into your forehead. We can go into specifics later if needed.

2: I don't know smit, nor do I consider him a friend. That we agree on a couple of things is coincidence. I, for example, did not summon my secret little band of Circlesmits to have them come to my rescue when things weren't going my way.

3: Concede an election? Are you really that fucking stupid? (No really, are you?) Did she incite a band of misinformed idiots to storm the Capital when she lost?

4: You have a serious misconception of how long I have been here, or what I have accomplished in this industry. And before you start throwing around words like narcissistic, perhaps learn what it means.


FWIW, if micro was banned for making a threat, the banning was deserved.
Funny Funny x 1 View List

mowens

micro was a dick on here. Or the old forum. Fuck, I'm too old to remember.
Funny Funny x 1 View List
"I would gladly risk feeling bad at times if it also meant that I could taste my dessert." - Data

jstell

Quote from: Incogneeto on May 09, 2026, 04:01 PMLeave . you are not Welcome here.
Last time I checked you're the only one who's been banned from here in the year I've been using your sagging scrotum as a punching bag.
Like Like x 1 View List

jstell


Newbeeee™

TheeCircle™ (EuroPeon Division)
     :cheers:    :cheers:

jstell

Quote from: Brian on May 09, 2026, 09:00 PMRon ... -when did he ditch this place?
It's easy to find out, just look at his profile, still here.

jstell

Quote from: Brian on May 09, 2026, 09:00 PMit would be difficult to recommend this place to folks looking for MC-specific or machining advice.
The other sh!#show is that up until recently you had to actually login to see the general and other off-topic, so if you didn't it would seem to be another helpful forum, just with slightly(?) less content and participation than emc and the official forum.