IDOCRACY RANT OF THE DAY

Started by DUM1, February 09, 2021, 11:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages 1 2 3 4 5 6

Incogneeto

#45
February 15, 2021, 03:31 PM Last Edit: December 31, 1969, 04:00 PM by Guest
[quote="Matthew Hajicek" post_id=6852 time=1613431122 user_id=57]
I have one engineer here who likes to put the tolerances in the Solidworks sketches so he doesn't have to make a print.  That's a royal pain.
[/quote]

I didn't ask you what you needed.

I asked them.


Sometimes engineers are high headed. They gots a degree.

I'm trying to make My Job easier....Sometimes a Lil Butter makes the pancakes.


And yes Heavy on the Syrup.

But getting the best result for the Company should be our Goal.

DUM1

#46
February 19, 2021, 06:04 AM Last Edit: December 31, 1969, 04:00 PM by Guest
[quote="Matthew Hajicek" post_id=6822 time=1613414881 user_id=57]
Project manager who was with us for about a year and a half: "So when you bring a model into Mastercam does it automatically generate the code for your machine or do you have to mess with it a bit?"
[/quote]

Still get asked that on a monthly basis , then i refer to them for the 100th time .... I'm an expert I can do anything


seven red lines parallel

Matthew Hajicek

#47
February 19, 2021, 07:51 AM Last Edit: December 31, 1969, 04:00 PM by Guest
Perpendicular, with a green marker.

DUM1

#48
February 19, 2021, 01:07 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Incogneeto post_id=6845 time=1613424903 user_id=72[quote="Matthew Hajicek" post_id=6822 time=1613414881 user_id=57]
Project manager who was with us for about a year and a half: "So when you bring a model into Mastercam does it automatically generate the code for your machine or do you have to mess with it a bit?"


Now That is Funny.

Sad, But Funny.
[/quote]

reminds me of a time the shop manager was walking through the shop and grabs one of my 1 2 3 blocks and looks at it kind of puzzled like and says geez we sure make a lot of these..

Incogneeto

#49
February 19, 2021, 02:56 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: DUM1 post_id=7124 time=1613768834 user_id=130
Quote from: Incogneeto post_id=6845 time=1613424903 user_id=72[quote="Matthew Hajicek" post_id=6822 time=1613414881 user_id=57]
Project manager who was with us for about a year and a half: "So when you bring a model into Mastercam does it automatically generate the code for your machine or do you have to mess with it a bit?"


Now That is Funny.

Sad, But Funny.


reminds me of a time the shop manager was walking through the shop and grabs one of my 1 2 3 blocks and looks at it kind of puzzled like and says geez we sure make a lot of these..
[/quote]

 :_thumbup:  :lol:


Yep Mine walked through and saw all the Barrels full of Material and Says"Why do we have sooo Much Scrap?"

He Never looked at all the parts in the Bins.

DURRRR!!!

RobertELee

#50
February 19, 2021, 03:18 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Incogneeto post_id=7142 time=1613775418 user_id=72
Quote from: DUM1 post_id=7124 time=1613768834 user_id=130
Quote from: Incogneeto post_id=6845 time=1613424903 user_id=72Now That is Funny.

Sad, But Funny.


reminds me of a time the shop manager was walking through the shop and grabs one of my 1 2 3 blocks and looks at it kind of puzzled like and says geez we sure make a lot of these..


 :_thumbup:  :lol:


Yep Mine walked through and saw all the Barrels full of Material and Says"Why do we have sooo Much Scrap?"

He Never looked at all the parts in the Bins.

DURRRR!!!


And then there was a coalition of carpet walkers assembled the next week to reduce machining scrap amounts....?

Been there...done that... :wallbash:

Incogneeto

#51
February 19, 2021, 03:49 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: RobertELee post_id=7145 time=1613776714 user_id=55
Quote from: Incogneeto post_id=7142 time=1613775418 user_id=72
Quote from: DUM1 post_id=7124 time=1613768834 user_id=130reminds me of a time the shop manager was walking through the shop and grabs one of my 1 2 3 blocks and looks at it kind of puzzled like and says geez we sure make a lot of these..


 :_thumbup:  :lol:


Yep Mine walked through and saw all the Barrels full of Material and Says"Why do we have sooo Much Scrap?"

He Never looked at all the parts in the Bins.

DURRRR!!!


And then there was a coalition of carpet walkers assembled the next week to reduce machining scrap amounts....?

Been there...done that... :wallbash:


"Ya Know if we paid someone else to make parts for us , We wouldn't have Scrap" !! :w00t:

byte

#52
February 20, 2021, 05:10 AM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: DUM1 post_id=7124 time=1613768834 user_id=130
Quote from: Incogneeto post_id=6845 time=1613424903 user_id=72[quote="Matthew Hajicek" post_id=6822 time=1613414881 user_id=57]
Project manager who was with us for about a year and a half: "So when you bring a model into Mastercam does it automatically generate the code for your machine or do you have to mess with it a bit?"


Now That is Funny.

Sad, But Funny.


reminds me of a time the shop manager was walking through the shop and grabs one of my 1 2 3 blocks and looks at it kind of puzzled like and says geez we sure make a lot of these..
[/quote]

 :wallbash:

DUM1

#53
February 22, 2021, 01:12 PM Last Edit: December 31, 1969, 04:00 PM by Guest
todays special , weekend guy says this is impossible , these parts cant be made this way! spends all weekend re vamping " optimizing" he sys .
come in to a pile of scrap from the original way we made them, another pile of scrap from the "optimized" way that the guy thought were good parts ... and I get the ole  what happened we have been making these for the last 7 years? what's changed ? and never have had a problem before  speech, from the weekend and day shift supervisors at my desk
                                                       I reply only things that changed are the people making the parts and the people supervising the people making
                                                       the parts .... anything else I can help you with .




                                      How can we keep this from ever happening again ???!!!??? :wallbash:  :wallbash:  :wallbash:  :wallbash:

Jon@NOWHERE

#54
February 22, 2021, 01:45 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: DUM1 post_id=7284 time=1614028372 user_id=130todays special , weekend guy says this is impossible , these parts cant be made this way! spends all weekend re vamping " optimizing" he sys .
come in to a pile of scrap from the original way we made them, another pile of scrap from the "optimized" way that the guy thought were good parts ... and I get the ole  what happened we have been making these for the last 7 years? what's changed ? and never have had a problem before  speech, from the weekend and day shift supervisors at my desk
                                                       I reply only things that changed are the people making the parts and the people supervising the people making
                                                       the parts .... anything else I can help you with .




                                      How can we keep this from ever happening again ???!!!??? :wallbash:  :wallbash:  :wallbash:  :wallbash:


Were both piles of scrap from the same person?

What I like is when management asks you to adjust a machine to a manual operation.  I have been asked several times to adjust the part so they will stop scrapping them at polish... :wallbash:

Matthew Hajicek

#55
February 22, 2021, 01:46 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: DUM1 post_id=7284 time=1614028372 user_id=130How can we keep this from ever happening again ?


Simple answer: don't employ idjits.

Incogneeto

#56
February 22, 2021, 02:21 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Jon@NOWHERE post_id=7287 time=1614030336 user_id=65
Quote from: DUM1 post_id=7284 time=1614028372 user_id=130todays special , weekend guy says this is impossible , these parts cant be made this way! spends all weekend re vamping " optimizing" he sys .
come in to a pile of scrap from the original way we made them, another pile of scrap from the "optimized" way that the guy thought were good parts ... and I get the ole  what happened we have been making these for the last 7 years? what's changed ? and never have had a problem before  speech, from the weekend and day shift supervisors at my desk
                                                       I reply only things that changed are the people making the parts and the people supervising the people making
                                                       the parts .... anything else I can help you with .




                                      How can we keep this from ever happening again ???!!!??? :wallbash:  :wallbash:  :wallbash:  :wallbash:


Were both piles of scrap from the same person?

What I like is when management asks you to adjust a machine to a manual operation.  I have been asked several times to adjust the part so they will stop scrapping them at polish... :wallbash:


Bwahahahahah ..... I Know Deburr.....It's your Fault!!!

Incogneeto

#57
February 22, 2021, 02:22 PM Last Edit: December 31, 1969, 04:00 PM by Guest
[quote="Matthew Hajicek" post_id=7288 time=1614030395 user_id=57]
Quote from: DUM1 post_id=7284 time=1614028372 user_id=130How can we keep this from ever happening again ?


Simple answer: don't employ idjits.
[/quote]

It is correctly Called...... I , D, Ten,T's

Jon@NOWHERE

#58
February 22, 2021, 02:28 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Incogneeto post_id=7289 time=1614032470 user_id=72
Quote from: Jon@NOWHERE post_id=7287 time=1614030336 user_id=65
Quote from: DUM1 post_id=7284 time=1614028372 user_id=130todays special , weekend guy says this is impossible , these parts cant be made this way! spends all weekend re vamping " optimizing" he sys .
come in to a pile of scrap from the original way we made them, another pile of scrap from the "optimized" way that the guy thought were good parts ... and I get the ole  what happened we have been making these for the last 7 years? what's changed ? and never have had a problem before  speech, from the weekend and day shift supervisors at my desk
                                                       I reply only things that changed are the people making the parts and the people supervising the people making
                                                       the parts .... anything else I can help you with .




                                      How can we keep this from ever happening again ???!!!??? :wallbash:  :wallbash:  :wallbash:  :wallbash:


Were both piles of scrap from the same person?

What I like is when management asks you to adjust a machine to a manual operation.  I have been asked several times to adjust the part so they will stop scrapping them at polish... :wallbash:


Bwahahahahah ..... I Know Deburr.....It's your Fault!!!


 :lol:  :bird:

I needed Yank to show me what I did wrong...

Incogneeto

#59
February 22, 2021, 02:36 PM Last Edit: December 31, 1969, 04:00 PM by Guest
Quote from: Jon@NOWHERE post_id=7291 time=1614032898 user_id=65
Quote from: Incogneeto post_id=7289 time=1614032470 user_id=72
Quote from: Jon@NOWHERE post_id=7287 time=1614030336 user_id=65Were both piles of scrap from the same person?

What I like is when management asks you to adjust a machine to a manual operation.  I have been asked several times to adjust the part so they will stop scrapping them at polish... :wallbash:


Bwahahahahah ..... I Know Deburr.....It's your Fault!!!


 :lol:  :bird:

I needed Yank to show me what I did wrong...


I Just smiled at First ...Then I saw you Flipped Me The Bird and Laughed out Loud.
Go Up Pages 1 2 3 4 5 6